Altronix ACM4CB Access Power Controller, 4 PTC Class 2 Relay Outputs, FAI, Board

Altronix ACM4CB converts one (1) 12 to 24 volt AC or DC input into four (4) independently controlled Class 2 rated PTC protected power-limited auto-resettable outputs rated at 2A each. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The ACM4CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. Units are designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outputs.\n\nSpecifications\n\n\nInput\n\n12 to 24 volt AC or DC operation (setting not required), (0.4A @ 12volt, 0.2A @ 24 volt current consumption with all relays energized).\nInput PTC is rated at 9A.\n\n\nPower supply input options:\n\na) One (1) common power input (board and lock power).\nb) Two (2) isolated power inputs (one (1) for board power and one (1) for lock/accessory power).\n\n\n\n\n\nFour (4) Access Control System trigger inputs:\n\na) Four (4) normally open (NO) inputs.\nb) Four (4) open collector sink inputs.\nc) Any combination of the above.\n\n\n\n\n\n\nOutput\n\nFour (4) independently controlled Class 2 Rated PTC protected power-limited auto-resettable 2A outputs:\na) Four (4) Fail-Safe and/or Fail-Secure power outputs.\nb) Four (4) dry form \